We have many refinishing services available ranging from porcelain bath tubs to machinery. Our family business is based out of north metro Atlanta, Georgia, and operated by a professional with over 14 years experience. We are happy to serve residential customers anywhere in the state of Georgia, and commercial customers anywhere in the United States.
We save you time and money by refinishing on-site. Most objects dry to light touch within hours and are ready to use the next day. This means less down time and more convenience for our customers. We paint with two different methods, Electrostatic and High Volume Low Pressure (HVLP). The electrostatic painting method is used to paint metal objects that conduct electricity.
When painting metal, we can achieve 99% cover efficiency, so there is little to no overspray. The HVLP method is used to spray paint a smooth finish on non-metallic items, without a brush and rolled texture. All coatings used in either process are Federal Government approved, and are of the highest quality available.
We save you time and money by refinishing on-site. Most objects dry to light touch within hours and are ready to use the next day. This means less down time and more convenience for our customers. We paint with two different methods, Electrostatic and High Volume Low Pressure (HVLP). The electrostatic painting method is used to paint metal objects that conduct electricity.
When painting metal, we can achieve 99% cover efficiency, so there is little to no overspray. The HVLP method is used to spray paint a smooth finish on non-metallic items, without a brush and rolled texture. All coatings used in either process are Federal Government approved, and are of the highest quality available.
Services
The HVLP (High Volume Low Pressure) painting process involves shooting air into the can at about 15psi.
The pressure builds up in the can, and the trigger allows the paint to spay from the nozzle.
This method is not recommended for indoors, although we can build a tent around us to contain the overspray, if necessary.
For information about the quality of our paint and drying times, we use Urethane Paint, for well venthilated areas and outdoors.
If the item is painted, indoors with little venthilation, an Enamel Paint is used, in accordance with federal regulations.
The pressure builds up in the can, and the trigger allows the paint to spay from the nozzle.
This method is not recommended for indoors, although we can build a tent around us to contain the overspray, if necessary.
For information about the quality of our paint and drying times, we use Urethane Paint, for well venthilated areas and outdoors.
If the item is painted, indoors with little venthilation, an Enamel Paint is used, in accordance with federal regulations.
The electrostatic process was designed to meet your refinishing needs without overspray or fog.
We use this process on all of the appliances and metallic objects we refinish.
Instead of blowing the coating on with 60 pounds of air pressure, the coating is applied to the item through a round revolving nozzle, spinning at approximately 600 R.P.M.
We atomize the paint with a positive electrical charge, and the item to be refinished is given a negative charge.
Then the coating is attracted to the metal item like metal shavings to a magnet -- giving a smooth, even coat of paint to even the most hard-to-reach places.
We use this process on all of the appliances and metallic objects we refinish.
Instead of blowing the coating on with 60 pounds of air pressure, the coating is applied to the item through a round revolving nozzle, spinning at approximately 600 R.P.M.
We atomize the paint with a positive electrical charge, and the item to be refinished is given a negative charge.
Then the coating is attracted to the metal item like metal shavings to a magnet -- giving a smooth, even coat of paint to even the most hard-to-reach places.
It is a superior High Performance 2-part Acrylic Urethane that combines superb corrosion and chemical resistance with exceptional weatherability and gloss retention.
This is the product of choice for exterior work when long-term exposure is a must.
Great for outdoor furniture, recreational equipment, fences, heavy equipment and machinery of all types.
Urethane provides outstanding resistance to gasoline, occasional splash and spillage of organic solvents including xylene, alcohols, oil, mineral spirits, and salt water.
This is the product of choice for exterior work when long-term exposure is a must.
Great for outdoor furniture, recreational equipment, fences, heavy equipment and machinery of all types.
Urethane provides outstanding resistance to gasoline, occasional splash and spillage of organic solvents including xylene, alcohols, oil, mineral spirits, and salt water.
Electrostatic painting is often confused for powder coating.
Both processes use electric charges to create magnetic bonds between the paint and the object, but a powder coat has to be baked in an oven off-site.
With electrostatic painting, the bond between the paint and the object insures the paint will hold up, allowing the few hours necessary to cure and dry.
The Electrostatic Process, in combination with high quality paint, makes for a new finish that will last years without chalking or fading.
Both processes use electric charges to create magnetic bonds between the paint and the object, but a powder coat has to be baked in an oven off-site.
With electrostatic painting, the bond between the paint and the object insures the paint will hold up, allowing the few hours necessary to cure and dry.
The Electrostatic Process, in combination with high quality paint, makes for a new finish that will last years without chalking or fading.
We specialize in painting colors that have metallic resemblance, such as Copper, Brass, and Alluminum.
We can provide a sample, upon request.
The copper and brass effects can only be achieved with the HVLP Painting Process.
The alluminum effect can be achieved with Electrostatic Process or the HVLP Painting Process.
Scuffmaster paint is sprayed with the HVLP Process, and is difficult for most to do correctly.
It truly requires an artistic touch to achieve the effects the paint is formulated for.
We can provide a sample, upon request.
The copper and brass effects can only be achieved with the HVLP Painting Process.
The alluminum effect can be achieved with Electrostatic Process or the HVLP Painting Process.
Scuffmaster paint is sprayed with the HVLP Process, and is difficult for most to do correctly.
It truly requires an artistic touch to achieve the effects the paint is formulated for.
Reviews
Be the first to review Jerry Meisner Electrostatic & Airless Refinishing.
Write a Review
